Licensed & Insured  |  Permitted & Inspected  |  Southwest Florida Since 1993

Whole House Re-Piping in Fort Myers. Stop Paying for the Same Leak Twice.

When leaks keep appearing in different places, the problem is not the joint that failed. It is the pipe material. Cypress Plumbing replaces failing polybutylene, corroded copper, and aging CPVC supply lines across Fort Myers, Cape Coral, Naples and the barrier islands. Most homes are completed in one to three days, permitted, pressure tested, and finished to Florida code.

Polybutylene · Corroded Copper · Aging CPVC · Slab Leaks · Low Pressure · Insurance & Real Estate Deadlines

1–3 DaysTypical Project Duration
Since 1993Repiping Southwest Florida
PermittedInspected & Pressure Tested
FinancingOptions Available

Whole House Repiping Fort Myers

When Repairs Stop Being the Cheaper Option.

Cypress Plumbing provides professional whole house repiping services in Fort Myers and throughout Southwest Florida. Our licensed plumbers inspect the existing plumbing system, identify failing pipe materials, and install modern piping designed to meet current plumbing codes and long-term performance standards. Each repiping project is completed with careful planning to ensure durable installations and dependable water distribution throughout the property.

Aging plumbing systems create ongoing problems for homes and businesses once pipes begin to deteriorate. Corrosion, internal buildup, and worn plumbing materials lead to recurring leaks, reduced water pressure, and inconsistent water flow throughout the property. Over time these issues cause water damage inside walls, flooring, and structural components while also increasing utility costs. In Southwest Florida homes, repeated leak repairs often signal a systemic piping problem rather than isolated issues, and if left unaddressed, pipe deterioration can weaken structural components and increase insurance risk.

Whole-house re-piping replaces aging infrastructure with modern piping systems built for long-term durability and compliance with current Florida plumbing standards. The upgrade restores consistent water pressure, prevents recurring failures, and significantly reduces the risk of future slab leaks and interior water damage. The goal of every repiping project performed by Cypress Plumbing is to restore reliable plumbing performance, protect homes and businesses across Fort Myers and Southwest Florida, and prevent recurring plumbing problems through durable, code-compliant pipe replacement.

Signs Your Home May Need Re-Piping

Six Things That Mean the Pipe Itself Is Failing

Property owners usually notice warning signs well before repiping becomes urgent. One leak is a repair. Several of these together is a system telling you the material has reached the end of its service life.

  • Multiple leak repairs within a 12- to 24-month periodThe clearest signal of all. Different locations failing in a short window means the material is failing, not one bad joint.
  • Discolored or rusty waterRust or brown tint at the tap points to corrosion happening inside the supply lines themselves.
  • Ongoing or worsening water pressure issuesGradual pressure loss across the whole house usually means scale and corrosion are narrowing the pipe interior.
  • Slab leaks or other hidden pipe failuresSlab construction is standard here, and a leak under the slab is expensive every time it happens. Repeat slab leaks rarely stop on their own.
  • Polybutylene or deteriorating copper pipingGrey polybutylene supply lines are a known failure risk and can affect insurance. Copper develops pinhole corrosion, especially with aggressive water.
  • Visible corrosion on exposed pipingWhat you can see at the water heater or in the garage is usually a fair indication of what is happening inside the walls.

We Diagnose Before We Quote

We identify the pipe material and assess actual system condition before recommending anything. Sometimes the honest answer is that your system has years left and one repair is all you need. We will tell you that.

When the material genuinely is failing, we will show you why continuing to repair it costs more over three years than replacing it once, including the water damage risk you are carrying in the meantime.

Assessments are free and there is no pressure attached to them.

Book a Free Assessment

Pipe Materials in Southwest Florida Homes

What Is Probably in Your Walls

The age of the house is the best first clue to what was installed and how it is likely to fail. We confirm the material during the assessment rather than assuming from the build year.

Replace

Polybutylene

Grey plastic supply pipe installed heavily from the late 1970s through the mid 1990s, exactly the boom period across Lee and Collier County.

How it fails
Degrades from the inside and fails without visible warning.
Why it matters
Can affect insurance availability, premiums, and renewal, and frequently surfaces in a four point inspection or a sale.
Assess

Aging Copper

Long the default in older construction and still perfectly good when healthy, but not immune to Southwest Florida water chemistry.

How it fails
Pinhole corrosion, usually appearing in clusters once it starts.
Why it matters
One pinhole is a repair. A second and third in the same year is a pattern worth pricing out.
Assess

Early CPVC

Rigid cream or tan plastic pipe used widely as a polybutylene replacement and in newer construction through the 1990s and 2000s.

How it fails
Becomes brittle with age and heat exposure, cracking at fittings and stress points.
Why it matters
Older CPVC in a 30-plus year old home deserves a real condition assessment, not an assumption.
Modern

PEX & New Copper

What a modern repipe is installed in. PEX is flexible with fewer in-wall joints and strong scale resistance; copper remains a rigid, long-established choice.

How we choose
Based on the home's layout, available routing, water conditions, and your preference and budget.
Why it matters
We walk through the trade-offs rather than defaulting to one material on every job.
Polybutylene Replacement → Found grey poly during an inspection or a sale? That page covers it in detail.

What to Expect From a Re-Piping Project

One to Three Days, and You Stay in the House

Most whole-house re-piping projects are completed within one to three days, depending on the size of the property and the complexity of the plumbing layout. Work is performed using a structured installation process designed to minimize disruption and protect interior finishes. Our licensed plumbers will:

  • Protect flooring, cabinetry, and fixtures before any work starts
  • Replace water supply lines using a phased installation sequence
  • Conduct comprehensive pressure testing on the new system
  • Verify compliance with Florida plumbing codes
  • Restore access areas after installation is complete

The phased sequence is what keeps you in the home. Water is shut off during defined windows rather than for the whole project, and you will know those windows in advance so you can plan around them.

Whole-house re-piping is a long-term infrastructure investment that eliminates frequent leak repairs and improves overall plumbing system reliability. All installations comply with current Florida state and municipal plumbing code requirements.

Repiping on a Deadline?

Repipes are often driven by something with a clock on it: an insurance carrier asking about polybutylene, a four point inspection finding, or a closing where the buyer wants the supply lines addressed before funding.

Tell us the deadline when you call. We prioritise scheduling for properties under contract or facing an insurance date, and we provide written scope and pricing that can be used directly in a credit or repair negotiation.

Financing options are available, which frequently keeps a transaction moving when a repipe finding would otherwise stall it.

Request Priority Scheduling

How a Cypress Repipe Runs

From First Call to Final Inspection

1. Free Assessment

We identify the pipe material, assess condition, and look at routing options. You get an honest read on whether replacement is actually warranted.

2. Written Scope & Price

Material recommendation, scope, timeline, and a firm price in writing before anything is committed to.

3. Permits & Protection

Permits pulled as the scope requires. On day one, flooring, cabinetry, and fixtures are protected before a single wall is opened.

4. Phased Installation

New supply lines run in sequence so water service returns between phases and you can stay in the home.

5. Test, Inspect, Restore

Comprehensive pressure testing, municipal inspection, and restoration of access areas. Then it is done, properly.

Why Supply Lines Age Faster Here

Four Southwest Florida Conditions Working Against Your Pipes

Supply lines in Lee and Collier County do not reach the end of their life the way they do inland. These four conditions are why a repipe conversation arrives sooner here.

Mineral-Rich Water

Hard water leaves scale that narrows supply lines from the inside, gradually reducing pressure and stressing the pipe wall.

Slab Foundations

Supply lines run under concrete, so a failure means opening the slab. That is what makes repeat leaks so expensive here.

Coastal Salt Air

Salt exposure accelerates corrosion at exposed fittings, connections, and transitions, especially near the water.

The 1970s–1990s Build Boom

An enormous share of local housing stock dates to the polybutylene and early CPVC era, and it is all hitting end of life at once.

Active Leak While You Decide?

A repipe is a planned project, but a burst line is not. If water is running right now, call for 24/7 emergency dispatch. We will contain it first and talk about the long-term fix afterwards.

Call 24/7: (239) 504-1665

Questions About Re-Piping Your Home

Whole House Repiping FAQ

What is whole house repiping?

Whole house repiping is the complete replacement of a property's water supply lines, replacing the pipe that carries fresh water to every fixture rather than repairing one failed section. It is the correct solution when the pipe material itself is failing rather than a single joint, which is typically indicated by repeated leaks in different locations.

Repiping does not usually include drain, waste, and vent lines, which are a separate system and are addressed separately when needed.

How do I know if my home needs to be repiped?

Common indicators include multiple leak repairs within a twelve to twenty-four month period, discolored or rusty water, ongoing or worsening water pressure issues, slab leaks or other hidden pipe failures, visible corrosion on exposed piping, and polybutylene or deteriorating copper piping.

A single leak is a repair. A pattern of leaks in different locations usually means the material itself is failing and a whole house repipe becomes the more economical decision. We identify the pipe material and assess system condition before quoting.

How long does a whole house repipe take?

Most whole house repiping projects are completed within one to three days, depending on the size of the property and the complexity of the plumbing layout. Work is performed using a structured, phased installation sequence designed to minimize disruption and protect interior finishes.

Do I have to move out during the repipe?

In most cases no. Flooring, cabinetry, and fixtures are protected before work begins, and the phased installation sequence means water service is interrupted only during specific periods rather than continuously. Your plumber will tell you in advance when water will be off so you can plan around it.

For larger properties or unusually complex layouts, the schedule is discussed in detail before work begins.

What is polybutylene and why does it matter here?

Polybutylene is a grey plastic supply pipe widely installed in homes built from the late 1970s through the mid 1990s, a period of heavy construction across Lee and Collier County. It is known to degrade from the inside and fail without warning.

Because of that failure history, the presence of polybutylene can affect insurance availability, premiums, and renewal, and it frequently surfaces during a real estate transaction or four point inspection. See our polybutylene replacement page for detail.

What pipe material do you use?

Modern repipes in Southwest Florida are generally done in PEX or copper, and the right choice depends on the layout of the home, the routing available, water conditions, and your preference and budget.

PEX is flexible, requires fewer fittings and joints through the walls, resists scale, and is not vulnerable to the pinhole corrosion that affects copper. Copper is rigid, long established, and preferred by some owners. We walk through the trade-offs during the assessment rather than defaulting to one material.

Will repiping fix my low water pressure?

If the pressure loss is caused by internal corrosion, scale buildup, or mineral deposits narrowing the supply lines, then yes, replacing those lines restores consistent pressure and flow throughout the property.

If the cause is a failing pressure regulator, a partially closed valve, a water service line problem between the meter and the building, or a municipal supply issue, repiping will not solve it. That is exactly why diagnosis comes before any quote.

Is the work permitted and inspected?

Yes. All installations comply with current Florida state and municipal plumbing code requirements, with permits pulled and inspections completed as the scope requires. The system also receives comprehensive pressure testing before the job is considered complete, and access areas are restored after installation.

Permitted and inspected work matters for insurance and for the eventual sale of the property.

Is financing available?

Yes. Financing options are available and are commonly used for whole house repipes, so homeowners can address failing supply lines now rather than continuing to pay for repeat repairs and carrying the water damage risk in the meantime. See our plumbing financing page.

Do you repipe condos and commercial buildings?

Yes. We perform supply line replacement for condominium buildings, multi-unit communities, and commercial structures across Southwest Florida, with phased scheduling that keeps residents and tenants in place and pricing structured so owners, boards, and property managers can budget the work. See our commercial plumbing services.

Repiping Across Southwest Florida

Areas We Serve

From our Fort Myers shop at 3560 Teeside Ln, Cypress Plumbing repipes homes and buildings across Lee, Collier, and Charlotte County communities.

Why Homeowners Choose Cypress for a Repipe

A Repipe You Only Have to Do Once

Diagnosis First

We identify the material and assess real condition before quoting. If you do not need a repipe, we say so.

30+ Years Local

Founded in 1993. We know which neighbourhoods got polybutylene, which got early CPVC, and how each one fails.

Permitted & Tested

Permits, municipal inspection, and comprehensive pressure testing. Documentation that holds up for insurance and resale.

Financing Available

Flexible options so a failing supply system gets replaced now instead of after the next water damage claim.

Licensed. Insured. Permitted. Local Since 1993.

Find Out What Is Actually In Your Walls.

A free assessment tells you the pipe material, the real condition of the system, and what replacement would cost, with no obligation. If your system has years left, that is what we will tell you.

Call Now Free Assessment

Get Fast, Professional Plumbing Service From Licensed Local Experts

From emergency plumbing repairs and slab leak detection to sewer line replacement, water heater installation, and full residential or commercial system service, our licensed Florida plumbers are ready to respond.

If you are experiencing active leaking, flooding, sewer backup, or no hot water, call now for immediate priority dispatch (239) 504-1665